Before Installing The Appliance; Does Your Old Appliance Have A Different Hinging Mechanism - Miele KF 9757 iD-3 Operating And Installation Manual

Installation
The ventilation gaps must not be
covered or blocked in any way.
They should be dusted on a regular
basis.

Before installing the appliance

^ Before installation, remove the cover
strip, sealing strip and other
accessories from the appliance and
from the external rear wall of the
appliance.
^ Do not remove the spacers from the
back of the appliance. These ensure
the gap required between the back
of the appliance and the wall is
maintained.
^ Remove any cable clips from the
back of the appliance.
52
^ Remove the red transport fixing a,
and use the stopper supplied b to
plug the empty hole.
^ Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
Does your old appliance have
a different hinging
mechanism?
If your old appliance had a different
type of hinging, the furniture door can
still be used. Remove the old hinges
from the housing unit. They are no
longer required because the furniture
door is now fitted to the appliance door.
All the necessary parts are supplied or
can be ordered from the Miele Spare
Parts Department.