Day; Name; Start / Stop Day; Keypad Hi/Lo Temp - Bosch Solution 64 User Manual

3. Enter the new start and stop times in 24-hour format
(00:00 to 23:59 hours).
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
System > Schedules >

Day

This menu programs which days of the week the timer execute
function will operate. To toggle the day of the week on/off, press
the corresponding number on the keypad (e.g. to turn Monday
on, press [2] + [OK], to toggle Monday off, press [2] + [OK] ).
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [7] + [5] + [2].
A list of schedules will display on the keypad.
Sk001 Schedule 1 Name
Sk002 Schedule 2 Name
Sk003 Schedule 3 Name
Press

2. Use the [↑] and [↓] keys to select the schedule that you
want to change, then press [OK] to select. Alternatively,
you can enter the schedule number, then press [OK].
The keypad will display the following:
Day Sk001
S M T
Y Y Y
Press 1-8 OK to SAVE
3. Press [1] to [8] to enable/disable the days of the week that
the schedule will operate.
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
System > Holidays >

Name

This menu allows you to program 16 characters for the holiday
name.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [7] + [0] + [6].
A list of holiday names will display on the keypad.
2. Use the [↑] and [↓] keys to select the timer name that you
want to change, then press [OK] to select. Alternatively,
you can enter the timer number, then press [OK].
The keypad will display the following:
Name H001
Holiday 1 Name
◄►
PRESS
3. To program the holiday name, use the [] and [] keys to
scroll the cursor left and right across the user name text.
Bosch Security Systems 09/06 BLCC110U
MENU 7-5-2
OK or MENU
W T F S Hol
Y Y Y Y N
MENU 7-6-0
OK to SAVE

Use the [] and [] keys to scroll through the different
characters available. To clear all text from the cursor
position to the right, press the [OFF] key.
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
System > Holidays >

Start / Stop Day

This menu allows you to program the start date and the stop
date of each holiday period.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [7] + [6] + [1].
A list of holiday names will display on the keypad.
2. Use the [↑] and [↓] keys to select the holiday that you
want to change, then press [OK] to select. Alternatively,
you can enter the holiday number, then press [OK].
The keypad will display the holiday start date:
Holiday Dates H001
Start Date
01 Jan
◄►
Press
3. To program the holiday start date and stop date, use the
[↑] and [↓] keys to scroll the cursor left and right between
the holiday day and month. Use the [←] and [→] keys to
scroll the day and month.
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
System > System Options >

Keypad Hi/Lo Temp

The keypad Hi/Lo temperature allows you to program the
minimum (0 °C) and maximum (50 °C) temperatures the keypad
will monitor (tolerance = +/- 2 °C).
If the temperature falls below the minimum temperature, the
keypad will display 'Low Temp ˚xx' . If the temperature increases
above the maximum temperature, the keypad will display 'High
temp ˚xx' .
(xx = programmed temperature to be monitored).
Enter programming mode (PIN + MENU) then,
1. Press [MENU] + [7] + [7] + [3].
The keypad will display the current temperature settings.
Keypad Hi/Lo Temp
High Temp
00
◄►
Press
2. Use the [↑] and [↓] keys to program the 'High' and 'Low'
temperatures. To toggle between the 'High' and 'Low'
temperature, use the [←] and [→] keys (Range = 0°C to
50°C).
3. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Solution 64 User Guide
MENU 7-6-1
Stop Date
01 Jan
OK to SAVE

MENU 7-7-3
Low Temp
00
OK to SAVE

27