NEC Express5800 320La User Manual page 25

Table 1-4. PCI module Status LED Indicators
Fail LED State Status
Off Green
Off Amber
Off Off
Red Green
Red Off
Table 1-5. PCI Adapter-Slot Status LED Indicators
Fail LED State LED
Off Amber
Off Green
Off Off
Red Off
Red Amber
Red
Green
Description Response
Both PCI modules None required (normal)
are operating
normally.
PCI module in Place the offline PCI module online
simplex mode is so that the system is running in
operating normally. duplex mode.
Other PCI module is
offline.
No power to PCI Check that the module is properly
module. installed. Also, check both power
supplies and power cords.
PCI module is None required (normal)
running POST.
Standby mode. Turn on system power.
(No DC power, AC
power only)
PCI module failure Check that the module is properly
installed. If the condition persists,
contact your technical support
representative.
Description Response
PCI adapter is Install identical PCI adapter in
running in simplex corresponding slot in the other PCI
mode. module.
POST or PCI None required (normal)
adapter is running in
duplex mode.
PCI adapters are not Install PCI adapters.
installed or are not
installed correctly.
PCI adapter is Place the PCI adapter online.
installed correctly
but not working or
offline.
PCI adapter being Wait for the LED indicator to
tested under change. If the LED indicator does
software control or not change, check the status of the
preparing for adapter.
operation.
Memory dump Wait until the memory dump or
request is being diagnostics are finished.
issued or
diagnostics are
running.
System Overview 1-11