Matrox Productiva G100 Installation Manual page 9

To use a SCART adapter, connect the SCART end of the adapter to your TV or VCR, then
connect the other end to your Matrox card and sound card.
For a TV with separate lines for red, green and blue video signals, a special SCART adapter is
available. For more information on this special adapter, see the Matrox Web site
(www.matrox.com/mga).
Restart your computer
7
If you're using Windows 95/98, it detects new hardware when you restart. If Matrox display
drivers haven't been previously installed, Windows reports finding a PCI adapter (even if you
have an AGP card).
If you see the
If you see the
If you see the
, then
Finish Yes
At this point, Windows is using a display driver that doesn't fully support your Matrox graphics
card. To install Matrox display drivers and other software,
page 10.
Install the software
8
If you're using Windows 95/98 or Windows NT 4.0,
If you're using Windows 3.1, Windows NT 3.51, or OS/2 Warp 3.0/4.0, see the readme file
in the root folder of the "Matrox Installation" CD-ROM.
* If you prefer, you can select "
drivers from the root folder of the "Matrox Installation" CD-ROM.
New Hardware Found
Update Device Driver Wizard
Add New Hardware Wizard
to restart your computer.
Driver from disk provided by hardware manufacturer
dialog box, click "
Do not install a driver
dialog box, click
dialog box, click
see "Software installation",
see "Software installation", page
Matrox Graphics Card – Installation Guide
", then
, then .
Next Finish
Next Next Next
" to install the Matrox display
.*
OK
Next
10.
9