NEC Express5800 1080Xd User Manual page 40

USERS_GUIDE_1080XD_hw
1.4.7.5.6 UP (Bring up System)
Function:
Turn on the DC power of the system and initialize HW to boot BIOS.
After this, whether OS is to be booted or not depends on the setting of BIOS/EFI.
(Screen Image)
iSPyz: ---> up<ENTER>
This command will bring up the specified partition.
Enter partition number (0-7/all/CR=exit) : all<ENTER>
Execute OK? (y/[n]) y<ENTER>
UP command was accepted. All partitions will run soon.
[iSPyz: INFO.ccc] partition 0 : power on sequence started.
[iSPyz: INFO.ccc] partition 1 : power on sequence started.
:
[iSPyz: INFO.ccc] partition 1 : power on sequence completed normally.
:
[iSPys: INFO.ccc] partition 1 : handed off the control to BIOS.
(Description)
Description
code
(a)
(b)
(c)
(d)
1-40
Enter the partition number.
If you select "all", all the configured partitions are set to be objects.
Display a confirmation message.
Enter "y" to continue the operation.
Display a UP command acceptance message.
Actual process operates in the background.
Display the operation status in the background.
Available against a partition not in
operation (in the DC-OFF status)
Description
NML MNT
X X
Description
code
(a)
(b)
(c)
(d)