NEC Express5800 1080Xd User Manual page 37

USERS_GUIDE_1080XD_hw
1.4.7.5.3 DP (System Dump)
Function:
Generate dump interruption in the system.
It depends on the software (OS or BIOS) to operate the dump process or execute the system
reset subsequently. This command has a sole function to generate dump interruption.
No action occurs if the software is not operating.
(Screen Image)
iSPyz: ---> dp<ENTER>
Dump button interrupt will be generated.
Enter partition number (0-7/all/CR=exit) : all<ENTER>
Execute OK? (y/[n]) y<ENTER>
DP command was accepted. Dump button interrupt will be ganeratedsoon.
[iSPyz: INFO.ccc] partition 0 : dump button interrupt.
[iSPyz: INFO.ccc] partition 1 : dump button interrupt.
:
:
:
(Description)
Description
code
(a)
(b)
(c)
(d)
Enter the partition number.
If you select "all", all the configured partitions are set to be objects.
Display a confirmation message.
Enter "y" to continue the operation.
Display a command acceptance message.
Actual process operates in the background.
Display the operation status in the background.
Available against a partition in operation
(after automatic boot/UP command
executed)
Description
NML MNT
X X
Description
code
(a)
(b)
(c)
(d)
1-37