Memory channel lockout *
Narrow FM
Beat shift
* Program Scan Memory and the Priority channel cannot be stored as ON or OFF for Memory
channel lockout.
STORING SIMPLEX AND STANDARD REPEATER FREQUENCIES
1 Press [VFO] to enter VFO mode.
2 Rotate the ENC control to select your desired frequency.
•
You can also directly enter a desired frequency using the keypad.
3 If storing a standard repeater frequency, select the following data:
•
Offset direction
•
Tone function, if necessary
•
CTCSS/ DCS function, if necessary
If storing a simplex frequency, you may select other related data (CTCSS or DCS
settings, etc.).
4 Press [F] - [MR].
•
A memory channel number appears and blinks.
•
When the channel has stored data, the "
•
Memory channel numbers L0/U0 ~ L2/U2 and Pr (Priority Channel) are reserved for
other functions.
5 Rotate the ENC control to select the memory channel in which you want to
store the data.
6 Press [MR] to store the data to the channel.
Note: If you store the data in a Memory channel that already has data stored in it, the old
data will be cleared and the new data will be stored.
Parameter
Simplex &
Repeater
Yes
Yes
Yes
" icon appears.
Odd-split
Yes
Yes
Yes
19