Enabling Auto Firmware Update For Your Router - Belkin N150 User Manual

USING YOUR ROUTER
A prompt asking, "Do you want to continue and
restore settings?" will appear. Click "OK" and then the
Router begins to restore the previous settings.
The previous settings have been restored successfully.

Enabling Auto Firmware Update for Your Router

The Router has the capability to automatically check
for a newer version of firmware and alert you when it's
available. You can choose to download the new version
or ignore it. By default this feature is enabled.
Note: We recommend you use a computer that
has a wired connection to the Router.
Setup Steps:
Click on "System Settings" in the left-hand
column under the "Utilities" heading.
Toward the lower-half side of the screen you will
find "Auto Update Firmware Enabling".
Select the "Enable" radio button.
Click "Apply Changes".
31