N150 Wireless Modem-router Adsl cable Power supply ethernet cable Network information card Belkin setup Cd with user Manual initial setup how to set it Up 1. Connect your router’s Adsl cable to your phone jack or phone- Where to place Your Router jack adapter (microfilter).
Page 4
gETTing sTaRTED 4. When prompted, enter the password shown on 5. open the internet explorer (ie) browser and enter http://192.168.2.1. in the login page displayed, enter the label on the underside of the router. the username admin and password admin.
Page 5
Click finish to finish, and now you are connected to the internet via your new Belkin router. if your PC has been installed with a wired network card, connect your PC to a lAN interface of the router using the ethernet cable.
gETTing sTaRTED advanced Tools & settings adding Computers to Your network After the initial setup is complete, you have the option to change Wireless devices such as computers, network printers, and gaming settings like your network name, security type, and password. systems can connect to your router with a few simple steps.
Page 7
2. select your Belkin router from the list of available networks. You Using the Wps button can identify your Belkin router by locating the network name (ssid) from the card located underneath the foot of your router. 1. start WPs Push Button Connection (WPs PBC) on your computer or other Wi-Fi device that you would like to 3.
gETTing TO KnOW YOUR ROUTER lan light Off: lAN connection is not created. blinking green: lAN data is being transmitted, or internet data is being transmitted in bridged mode. front panel solid green: lAN connection is established and activated. Your router’s status is shown by the lights on the front panel. Wlan light power light Off: WlAN is disabled.
gETTing TO KnOW YOUR ROUTER back panel Reset button this button is used to restart your router in rare cases when it Wps button functions incorrectly. resetting the router will preserve your settings. this button may also be used to restore the factory default settings. this button is used to help establish secure connection between your Please see the troubleshooting section for more information.
150Mbps across your network. naT ip address sharing to save you the cost of adding iP address per computer in your house, our Belkin router uses Network Address translation (NAt) technology, allowing you to share a single iP address across your network.
TEChniCal DETails system Requirements Modem router Broadband Adsl internet connection with rJ11 (telephone) connection At least one computer with an installed network interface adapter tCP/iP networking protocol installed on each computer rJ11 Adsl telephone cable internet browser setup software A computer running Windows XP sP3 and higher, ®...
TROUblEshOOTing, sUppORT, anD WaRRanTY Troubleshooting in order to determine if wireless issues are related to range, we suggest temporarily moving the computer within 10 feet from the router if possible. Changing the wireless channel—depending on local i can’t connect to the internet wirelessly . wireless traffic and interference, switching the wireless channel of your network can improve performance and reliability.
Page 13
TROUblEshOOTing, sUppORT, anD WaRRanTY i’ve installed this new Router and some of my network clients i am having difficulty setting up Wpa security on my Router . (computers, game consoles, ect .) are now unable to connect . 1. log in to your router by visiting http://192.168.2.1 Your new router came pre-configured with a network name and with your Web browser.
Page 14
TROUblEshOOTing, sUppORT, anD WaRRanTY i am having difficulty setting up WEp security on my Router . 1. log in to your router by visiting http://192.168.2.1 with your Web browser.Click on the “login” button in the top right-hand corner of the screen.
Belkin is unable to repair or replace the product (for example, because it has been discontinued), Belkin will offer either a refund or a credit toward the purchase of another product from Belkin.
Belkin product you must take the following steps: tHis WArrANtY CoNtAiNs tHe sole WArrANt Y oF BelKiN. tHere Are No otH er WArrANties, eXPressed or, eXCePt As 1.
However, there is no guarantee that We, Belkin International, Inc., of Schiphol-Rijk, Netherlands, declare under our interference will not occur in a particular installation. If this equipment does cause...
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC, the EMC Directive 2004/108/EC, and the low-voltage Directive 2006/95/EC. A copy of the European Union CE marking “Declaration of Conformity” may be obtained at the website: www.belkin.com/doc For information on product disposal please refer to http://environmental.belkin.com...
Need help?
Do you have a question about the N150 and is the answer not in the manual?
Questions and answers