Samsung HW-F450/ZA User Manual page 20

Using the AUTO POWER LiNK function
The Crystal SurroundAir Track is automaticallyturned on when you turn on the
TV or any device connected to the Air Track with the optical cable.
PressAUTO POWER on the remote control of this unit.
,, The Auto power link function turns on and off each time you press AUTO
POWER.
AUTO POWER LINK Display
ON POWERLINKON
OFF POWERLINKOFF
'_ If a TV or any device connected to Air Track with the optical cable is
off and there is no digital input, the Air Track is turned off after 20
minutes.
,_ These functions are available only when Anynet+ (HDMI-CEC) is
turned off.
Using the AUDIO SYNC function
Video may appear out of synch with the audio if the Air Track isconnected to a
digital T_. If this occurs, adjust the audio delay time to match the video.
PressAUDIO SYNC +/-. on the remote control of this unit.
,, You can use the +, - buttons to set the audio delay time between 0 ms
and 300 ms.
,_ In USB mode, TV mode or BT mode, the Audio Sync function may
not work.
Using the DRC function
This feature balances the range between the loudest and quietest sounds.
You can use this function to enjoy Dolby Digital sound when watching movies
at low volume at night.
Press DRC on the remote control of this unit.
,, Each time the button is pressed, the selection changes as follows :
DRC STANDARD =_ DRC MAX _ DRC MIN
Using the DIMMER function
This feature controls the brightness of the Display.
Press DIMMER on the remote control of this unit.
,, Each time the button is pressed, the selection changes as follows :
DIMMER ON = DIMMER OFF
SPEAKER button
If the TV and Air Track are connected via HDMI, this button lets you select
between listening to audio through your TV or through the Air Track.
Press SPEAKER on the remote control of this unit.
AUDIO MODE SPEAKER Scroll Display DiSplay
TV TV SPEAKER W SPK
HDMI IN
Air Track AVRSPEAKER HDMI
TV TV SPEAKER S MUTE
ARC
Air Track AVRSPEAKER TV ARC
2O