Kenmore 30" Built In Wall Oven Installation Instructions Manual page 4

Installation Instructions
Pre- Installation Checklist
cont.
Cover hinge with towel roils
paper
or toweling.
,_ CAUTION: When the door is removed and the hinge arms
are at the stop post!on, DO
NOT bump or try to move the
hinge arms. The hinges could
snap back causing an injury to
the hands. Cover the hinges with
toweling or empty towel rolls
while working in the oven area.
Place the oven on a table or
platform even with the cutout
opening. (Platform must support
150 Ibs. single, 275 Ibs double.)
Remove the bottom trim from the
top of the oven. It will be installed at
the end of installation The trim is
wrapped separately and taped to the
top of the unit.
Bottom Trim
Shipping Location
• Side Trim
4