Inserting An Sd Card; Setting The Clock - JVC GC-XA2 User Manual

Inserting an SD Card

• Insert a separately purchased SD card into the
SD slot firmly, until the card is locked.
• To remove the SD card, push the card in once,
and pull it out straight.
• When using a new SD card, format the card in
the menu screen.
Operation is confirmed with the following manufacturers' SD cards.
Class 4 or higher SD/SDHC/SDXC cards (up to 128GB)
When recording with 1080p60(1080p50), Class 6 or higher is required.
- SanDisk

Setting the Clock

1 Press and hold Power for 2 seconds to
turn the power on.
The clock setting screen appears the first
time the camera is used.
2 Press < or > to adjust the year, and press
SET.
3 Repeat the previous step to adjust the
month, day, hour, and minute.
You can re-adjust the clock from the menu screen.
1 Press MENU.
2 Press < or > to select "Setup", and press SET.
3 Press < or > to select "More", and press SET.
4 Press < or > to select "Time Setting", and press SET.
5 Press < or > to adjust the year, and press SET.
6 Repeat the previous step to adjust the month, day, hour, and minute.
12 Getting to Know Your Camera
- TOSHIBA