Table of Contents
Advertisement
STEP3. AttachthePlatformStoppertotheBackusing
/B
__
(2) #8x1/2" Panhead Screws (as shown in FIG. 4).
_
" ¢_
ack Panel
o-- ---
(,/8
o--
-_v
Platform Stopper
FOLLOWING ASSEMBLY DONE WITH CABINET UPSIDE DOWN:
STEP 4.
Attach the Back Panel, Front assembly and Back Brace onto the Connecting
Bolts in the
Right Side Panel (as shown in FIG. 5 below). (Attach the Back Panel first, to help support
unit when assembling). Turn Cams into locked position. Next attach Left Side Panel (upside
down) by guiding the Connecting
Bolts into the parts attached to the Right Side Panel (as
shown in FIG. 6); then Lock Cams. Place Clips and Inserts, in that order, in Side Panel. Tap
in Casters (as shown in FIG. 6A), "Locking
type in front, "Non-Locking"
in the rear.
Right Side Panel
C
Back Brace
Back Panel
@
Front Assembly
FIG. 6A
Cabinet
Panel
_
Caster
Caster
Insert
_ Caster
Clip
Right Side Panel
Assembly
FIG. 6
Page 4
98100-4
Advertisement
Table of Contents
