Connecting Wires To Terminals - Kenwood DNX7230DAB Quick Start Manual

Hide thumbs Also See for DNX7230DAB:
Table of Contents

Advertisement

Connecting wires to terminals

A: Black
(Ground wire)
B: Yellow
(Battery wire)
C: Red
C
(Ignition wire)
8
6
4
2
7
5
3
1
8
6
4
2
7
5
3
1
If no connections are made, do not let the
wire come out from the tab.
Connect either to the power control
terminal when using the optional
power amplifier, or to the power
terminal for the booster amplifier
of the film-type or short pole type
antenna.
Connect to the terminal that is
grounded when either the telephone
rings or during conversation.
To use the steering wheel remote
control feature, an exclusive remote
adapter (not supplied) that matches
your car is required.
2 WARNING for Connecting the ISO Conncetor
The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the
proper connections to prevent damage to the unit. The default connection for the wiring harness is described in
(1) below. If the ISO connector pins are set as described in (2), make the connection as illustrated. Please be sure
to reconnect the cable as shown (2) below to install this unit to the Volkswagen vehicles etc.
(1): Default setting
The red (A-7 pin) of the vehicle's ISO connector is
linked with the ignition, and the yellow (A-4 pin) is
connected to the constant power supply.
Red (Ignition cable)
Unit
Yellow (Battery cable)
DNX7230DAB/DNX5230DAB/DNX5230BT/DNX4230DAB/DNX4230BT
Fuse (10A)
Accessory 1
A
B
Blue/White (Power
control/ Antenna
control wire)
ANT.
P.CONT
CONT
Brown (Mute control
wire)
MUTE
Light Blue/Yellow
(Steering remote
control wire)
STEERING WHEEL
REMOTE CONT
REMOTE INPUT
Red (A-7 pin)
Vehicle
Yellow (A-4 pin)
31
Pin Numbers
Cable Color Functions
for ISO
Connectors
External Power
Connector
A-4
Yellow
A-5
Blue/White
A-6
Orange/White Dimmer
A-7
Red
A-8
Black
Speaker
Connector
B-1
Purple
B-2
Purple/Black
B-3
Gray
B-4
Gray/Black
B-5
White
B-6
White/Black
B-7
Green
B-8
Green/Black
*Speaker Impedance: 4-8 Ω
(2)
The red (A-7 pin) of the vehicle's ISO connector is
connected to the constant power supply, and the
yellow (A-4 pin) is linked to the ignition.
Red (Ignition cable)
Red (A-7 pin)
Unit
Yellow (Battery cable)
Yellow (A-4 pin)
Fuse (10A)
Battery
Power Control
Ignition (ACC)
Earth (Ground)
Connection
Rear Right (+)
Rear Right (–)
Front Right (+)
Front Right (–)
Front Left (+)
Front Left (–)
Rear Left (+)
Rear Left (–)
Vehicle

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dnx5230btDnx5230dabDnx4230dabDnx4230bt

Table of Contents