Cord Assembly - Kenmore Sears 116 Owner's Manual

Using a
screwdriver.
tighten the
screw,
CAUTION
Do not overtighten.
Overtighteningcould stripthe screwholes.
Do not operate the cleaner withoutthe screw in
place.
CORD ASSEMBLY
(STANDARD AND OPTIONALMODELS)
Make sure the
quick release
upper cord hook
is in the upright
position,
Remove the wire
tie from the
power cord
Wrap the power
cord around the
upper and lower
cord hooks,
W TOSTART
(STANDARD MODEL)
Unwrap the power cord. Plug the power cord into a
120 volt outlet located near the floor.
(OPTIONAL MODEL)
Release
1. Turn the quick
release cord hook
to either side and
down to release
the power cord.
2. Once the cord is
removed, lock the
cord into place by
forcing it into the
locking notch on
the body of the
cord hook as
shown.
3. Plug power cord into a 120-volt outlet Iocatea
near the floor.
WARNING
PersonalInjuryand ProductDamage Hazard
• DO NOTplug in if switch isin ON position.Personnl
injuryor damage could result.
• DO NOTuse outletsabove counters. Damage to
items in surrounding area could occur.
5