Installation Requirements; Tools And Parts; Options - Kenmore HE4t 110.4508 Owner's Manual And Installation Instructions

Front-loading automatic washer
Hide thumbs Also See for HE4t 110.4508:
Table of Contents

Advertisement

Available languages

Available languages

INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting
the water inlet hoses
Pliers (that open to 19/16" [39.5 mm])
Flashlight (optional)
Tools needed
for installation
Open end wrench 17 mm and 13 mm
Level
Wood block
Ruler or measuring tape
Parts supplied
Pedestal
You have the option of purchasing pedestals of different heights
separately for this washer. You may select a 13" (33 cm) or a
15.5" (39.4 cm) pedestal. Remember that the pedestal will add to
the total height of the unit.
CC>
Beaded strap
Transport bolt hole plug (4)
Optional pedestal
This pedestal (with storage drawer) is available in several colors.
To order, call your local Sears store. For further information,
please call 1-800-4-MY-HOME
® (1-800-469-4663).
Alternate
Parts
Parts listed are available from your local Sears store or Sears
Service Center. For further information, please call
Height
Height with
Number
1-800-4-MY-HOME
® (1-800-469-4663).
Washer
If You Have
You Will Need to Buy
13" (33 cm)
51" (130 cm)
White
42842
Laundry tub or
Sump pump system (if not already
standpipe taller
available)
than 96" (2.4 m)
Overhead sewer
Standard 20 gal. (76 L), 30" (76.2 cm)
tall drain tub or utility sink and sump
pump (available from local plumbing
suppliers)
Floor drain
Siphon break, Part Number 285834;
additional drain hose Part
Number 8318155; and connector
kit,
Part Number 285835
Drain hose too
4 ft (1.2 m) drain hose extension kit,
short
Part Number 285863
Water faucets
2 longer water fill hoses:
beyond reach of
6 ft (1.8 m) Part Number 76314,
fill hoses
10 ft (3.0 m) Part Number 350008
13" (33 cm)
51" (130 cm)
Bisque
42844
13" (33 cm}
51" (130 cm)
Graphite
42846
15.5" (39.4 cm)
53" (135 cm)
White
55842
15.5" (39.4 cm)
53" (135 cm)
Bisque
55844
15.5" (39.4 cm)
53" (135 cm)
Graphite
55846
15.5" (39.4 cm)
53" (135 cm)
Pacific Blue
55847
15.5" (39.4 cm)
53" (135 cm)
Champagne
55848
15.5" (39.4 cm)
53" (135 cm)
Sedona
55849
Stack Kit
Are you planning to stack your Kenmore washer and dryer? To do
so, find the stack kit (8541503) in the drum of the matching
Kenmore dryer. Follow instructions
included with the kit. See
"Location Requirements."

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HE4t 110.4508 and is the answer not in the manual?

Questions and answers

Molinda McCormick
February 3, 2025

What are the mixer/paddle/fin like things attached inside the washer to the drum? What if they pop off!? All of them!? Are there replacements parts?

Rick McGhee
March 5, 2025

the softener and liquid bleach will not drain during the wash cycle.

3 comments:
Mr. Anderson
March 5, 2025

The softener and liquid bleach may not drain during the wash cycle if they are overfilled beyond the "MAX" level in their respective compartments. Overfilling can prevent proper dispensing. Additionally, the liquid bleach compartment is designed to dilute and dispense bleach automatically during the first rinse, not during the wash cycle. Similarly, fabric softener is dispensed during the final rinse.

This answer is automatically generated

Rick McGhee
March 5, 2025

@Mr. Anderson

Rick McGhee
March 5, 2025

@Mr. Anderson The problem is that they do not drain

Nancy
March 13, 2025

My washer stops part way through and in the time area it flashes. F H sometimes if I press the stop bottom it will show the time left and if you push the start bottom it will start again

Table of Contents

Save PDF