Table of Contents
Advertisement
Maintenance and care
(3) Make sure that the handlebars are facing
straight ahead, and then adjust the free
play by turning the adjuster.
1 Rubber cover
2 Locknut
3 Adjuster
4 Throttle lever free play
Throttle lever free play:
2.0–5.0 mm (0.08–0.20 in)
(4) Hold the adjuster with one wrench while
tightening the locknut with another
wrench. Slide the rubber cover to its orig-
inal position.
(5) Install the front handlebar cover, and then
install the eight screws.
FX Cruiser SHO
(1) Remove the ten screws, and then re-
move the front and rear handlebar cov-
ers.
1 Front handlebar cover
2 Rear handlebar cover
91
(2) Slide the rubber cover away from the ad-
juster, and then loosen the locknut.
(3) Make sure that the handlebars are facing
straight ahead, and then adjust the free
play by turning the adjuster.
1 Rubber cover
2 Locknut
3 Adjuster
4 Throttle lever free play
Throttle lever free play:
2.0–5.0 mm (0.08–0.20 in)
(4) Hold the adjuster with one wrench while
tightening the locknut with another
wrench. Slide the rubber cover to its orig-
inal position.
Advertisement
Table of Contents
