Operation
3.
Place the tilt lock lever (if equipped) in
the release/up position.
4.
Pull up the shallow water lever (if
equipped).
5.
Hold the rear of the top cowling with one
hand and tilt the engine up fully.
6.
Push the tilt support knob into the clamp
bracket. Or the tilt support bar will turn to
the lock position automatically.
42
EMU28007
Procedure for tilting up (power trim
and tilt models / power tilt models)
1.
Place the remote control lever / gear
shift lever in neutral.
ZMU05547
ZMU05548
2.
Disconnect the fuel line from the out-
board motor or close the fuel cock.
3.
Press the power trim and tilt switch /
ZMU05528
power tilt switch "
board motor has tilted up completely.
N
ZMU05533
ZMU05547
" (up) until the out-