Preparation before Use
Connecting the Camera to
Your Computer
To set up the camera, fi rst connect it to
your computer.
Required operating environment
Browser: Internet Explorer 9 or later
1
Attach the supplied LAN cable to
the camera.
RESET
ETHERENT
2
Connect the camera to your
computer via the LAN cable.
3
Set the network mode switch to
[LAN•OFF].
DIRECT WLAN
LAN(OFF)
• If the network mode switch is set to
[DIRECT] or [WLAN], the LAN terminal
cannot be used.
• While the power is on, switching the
network mode switch does not change
the setting.
• Do not use cables (AV cable,
microphone, etc.) with L-shaped
connecters.
• For other ways of connecting, see
"Detailed User Guide".
10
For more details, refer to the Detailed User Guide at http://manual3.jvckenwood.com/
MIC
DC
DIRECT WLAN
LAN(OFF)
AV
BATT.
MIC
RESET
DC
DIRECT WLAN
LAN(OFF)
AV
ETHERENT
Connecting the AC Adapter
Connect the supplied AC adapter to the
DC connector.
RESET
ETHERENT
MIC
DC
DIRECT WLAN
LAN(OFF)
AV