Bluetooth Control; Registering And Connecting Bluetooth Unit - Kenwood DNN990HD Instruction Manual

Return to the Top page
Bluetooth Operation
ñ
B
luetooth Control
Using the Bluetooth function, various
functions can be used: listening to the audio
file, making/receiving a call.
Ñ
About the Smartphone/cell-
phone and Bluetooth audio
player
This navigation system conforms to the
following Bluetooth specifications:
Version
Bluetooth Ver4.0 Certified
Profile
Smartphone/cell-phone:
HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phonebook Access Profile)
SPP (Serial Port Profile)
Audio player:
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
NOTE
• For the smartphones/cell-phones verified for
compatibility, access the following URL:
http://www.kenwood.com/cs/ce/bt/.
• The navigation systems supporting the Bluetooth
function have been certified for conformity with
the Bluetooth Standard following the procedure
prescribed by Bluetooth SIG.
However, it may be impossible for such
navigation systems to communicate with your
smartphone/cell-phone depending on its type.
114
Registering and Connecting
Bluetooth Unit
It is necessary to register the Bluetooth audio
player or smartphone/cell-phone to this unit
before using the Bluetooth function.
You can register up to 5 Bluetooth units.
1
Press and hold the < 6 > button.
DNN990HD
HOME 6
DNN770HD
HOME
TEL
6
Hands Free screen appears.
2
Touch [ ].
Bluetooth SETUP screen appears.
See the following section for each setting.
• Registering the Bluetooth Unit (P.115)
• Connecting the Bluetooth unit (P.116)
Ñ
Registering the Bluetooth Unit
1
Touch [Search].
Searched Device List screen appears.
NOTE
• A new device cannot be registered if there are 5
registered Bluetooth units. Delete unnecessary
Connecting the Bluetooth unit
registration. See
(P.116).
• The Searched Device List screen cannot be
displayed, when the receiving source is Pandora
internet radio or Bluetooth Audio.
• This navigation system is compatible with the
Apple Easy Pairing function. When an iPod
touch or iPhone is connected to this navigation
system using Dock Connector to USB Cable,
an authentication dialog appears. Performing
operation for authentication on this navigation
system or iOS smartphone registers the
smartphone as a Bluetooth device.
2
Touch [PIN Code Set].
PIN Code Set screen appears.
NOTE
• If the Bluetooth unit cannot be searched in step
1, you can search it again by touching [Search] in
above screen.
• Touch [Cancel] to cancel searching for the
Bluetooth unit.
3
Enter PIN code and touch [Enter].
The entered code is recognized and
Searched Device List screen appears
again.
NOTE
• If you want to cancel the registration, touch
[Cancel].
• If you want to clear the entered number, touch
[Clear].
Return to the Top page
Bluetooth Operation
4
Select the Bluetooth unit to register
from the list.
The Connection Device List screen
appears.
NOTE
• You can also register the Bluetooth unit such as
smartphone by operating it. In this operation,
entering the PIN code is necessary. See step 2
to 3.
115