Removing A Pdu From A Cabinet - NEC Express5800/320Ma Installation Manual

Removing a PDU from a Cabinet

!
1. Remove the system from service. Use one of the following procedures:
•
Click Start and select Shut Down.
•
Press the power button once, if you have enabled Allow system to be
shutdown without having to logon enabled. See the Express5800/320Ma:
System Administrator's Guide.
2. Remove the power cables from the PDU.
3. Remove the four screws with one hand while supporting the PDU with the other
hand.
4. Slide the PDU out of the cabinet and place the PDU in a safe place.
C A U T I O N
If you are removing both PDUs that provide power to the
same components, turn off the system components.
Removing a PDU from a Cabinet
Installing PDUs 5-5