®
We have taken great care to give your new dryer the most convenient and easy-to-use
features. Use this guide to help optimize the use of your dryer.
Consult the Use and Care Guide for more detailed instructions. To contact the Sears Service Center, call 1-800-4-MY-HOME ® (1-800-469-4663).
Models/Modelos
100.7/6972#,
7/6973_,
7/6974#
Explosion
Hazard
Keep
flammable
materials
and vapors,
such
as
gasoline,
away
from
dryer.
Do not dry anything
that
has ever
had anything
flammable
on it (even
after
washing).
Failure
to follow
these
instructions
can
result
in
death,
explosion,
or fire.
Fire Hazard
No washer can completely remove oil.
Do not dry anything
that has ever had any type of
oil on it (including cooking oils).
Items containing foam, rubber, or plastic must be
dried on a clothesline
or by using an Air Cycle.
Failure to follow these instructions can result in
death or fire.
\
Clean the lint screen.
Place laundry in dryer.
Shut the door.
Select Auto Moisture Sensing Cycle,
• Turn cycle knob to recommended Auto Moisture Sensing
Cycle for type of load being dried.
• Use Normal Dry to dry most heavy to medium-weight
fabrics.
• Select temperature setting using Fabric Care selector.
or select Timed Dry Cycle.
• Turn cycle knob to Timed Dry.
• Turn cycle knob to desired drying time.
• Select temperature setting using Fabric Care selector.
Select the End of Cycle Signal.
Select the WRINKLE GUARD ®feature.
Press and hold the START button.
J
The End of Cycle Signal sounds when a cycle is complete. This signal is helpful when you are drying permanent press, synthetics, and other
items that should be removed from the dryer promptly at the end of a cycle.
The End of Cycle Signal is selectable. The signal stops when you open the door or turn the End of Cycle Signal on the Start button to Off.
If the WRINKLE GUARD ® feature is on, the End of Cycle Signal sounds every few minutes. If the End of Cycle Signal is turned off, you will not hear
WRINKLE GUARD ®sound every few minutes.
W10035734A
J
Continued
on back
Need help?
Do you have a question about the 100.7/6972* and is the answer not in the manual?
Questions and answers