Sharp LL-S201A Operation Manual page 24

Specifications
nDimensional Drawings
Note that the values shown are approximate values.
1 [25.2]
(excluding protrusions)
* Use a VESA-compliant mounting bracket capable of supporting 4 times the weight of the monitor.
* When attaching a VESA-compliant mounting bracket, use M4 screws that are 3/16inch to 1/4inch (4 to 6 mm). longer than the
thickness of the mounting bracket.
* When mounting the monitor on a wall or ceiling, ensure that the mounting location is capable of supporting 4 times the weight
of the monitor (e.g. a concrete wall or column).
nStanding position
24
E
18-1/4 [463.8]
18-1/4 [463.8]
Opening width (17 [432])
6-9/16 [167]
VESA holes *
1-15/16
nPen writing position
10-13/16 [275.3]
1-15/16
[50] [50]
Unit: inch [mm]