Monitor Status Indicators - Sharp LL-S201A Operation Manual

n Disabling operation lock
1. Press the MENU button.
The menu screen is displayed.
2. While touching [Volume], touch [Finger-only mode] for
at least 1 second.
Operation lock is disabled.

Monitor status indicators

Monitor status is displayed at the top right of the screen.
MENU button
Touch Mark
The touch mark displays the current touch action mode.
Press
This mark is displayed during finger/pen mode.
This mark is displayed during pen-only mode.
This mark is displayed during finger-only mode.
After being set, it can be set so that it is only displayed for
around 5 seconds. (See page 19.)
Rotation Mark
This mark is displayed when the rotate function is enabled.
After being set, it can be set so that it is only displayed for
around 5 seconds. (See page 19.)
Key Mark
When operation lock (See page 20) is set, the mark is
displayed for around 5 seconds when the screen is touched.
It can be set to display constantly. (See page 19.)
TIPS
• The display position can be changed from the menu
screen. (See page 19)
• These marks are not displayed while the menu screen is
displayed.
Finger/pen mode
Pen-only mode
Finger-only mode
Monitor Settings
Touch Mark
Rotation Mark
Key Mark
21
E