Dell PowerEdge Expandable RAID Controller 3 User Manual page 208

206
Troub les hoot in g
Ta b l e 1 3 - 2 . B I O S B o o t E r r o r M e s s a g e s (continued)
Message
Configuration
of NVRAM and
drives
mismatch. Run
View/Add
Configuration
option of PERC
3 BIOS
Configuration
Utility.
Press any key
to run the
Configuration
Utility.
Unresolved
configuration
mismatch
between disks
and NVRAM on
the adapter
after creating
a new
configuration
1 Logical Drive
Failed
TBBU Cache-data
seems to be
INVALID for
current
adapter.
Problem Suggested Solution
The configuration Press <Ctrl><M> to run
stored in the PERC 3 the BIOS Configuration
adapter does not Utility. Choose Configure
>
match the
configuration stored in to examine both the
the drives. configuration in non-volatile
random access memory
(NVRAM) and the
configuration stored on the
hard drives. Resolve the
problem by selecting one of
the configurations.
Some legacy Clear the configuration.
configurations in the
Low-level format the related
drives cannot be
drives and re-create the
cleared.
configuration.
A logical drive failed Make sure all physical drives
to sign on. are properly connected and
are powered on. Run the
BIOS Configuration Utility
to find out if any physical
drives are not responding.
Reconnect, replace, or
rebuild any drive that is not
responding.
The data on the Power off and put the TBBU
transportable battery on the proper adapter. Or if
backup (TBBU) unit is you want to discard the
not valid for the Cache-data and proceed,
current controller. press Y:.
—
View/Add Configuration