Perc 3/Sc Card Layout; Installation Steps; Figure 8-1. Perc 3/Sc Card Layout - Dell PowerEdge Expandable RAID Controller 3 User Manual

PERC 3/SC Card Layout

Figure 8-1 shows the PERC 3/SC card, jumpers, and connectors.
F i g u r e 8 - 1 . P E R C 3 / S C C a r d L a y o u t
SCSI Bus
Termination Power
J13
External
SCSI Connector
J15
RUBI Slot
Interrupt Steering
J16
RUBI Slot
Interrupt Steering

Installation Steps

This section provides an overview of installing the RAID controller. See the
following sections for more information about each step.
Unpack the PERC 3/SC controller and inspect for damage.
1
Make sure all items are in the package. If damaged, call your Dell™
original equipment manufacturer (OEM) support representative.
Turn the computer off and remove the cover.
2
Check the jumper settings on the PERC 3/SC controller.
3
Set SCSI termination.
4
Install the PERC 3/SC card.
5
J1 SCSI Bus Termination
J11
Enable Control
Internal
J10
Straddle Mount
J2 CPLD
Programming
J3 NVRAM Clear
J1
J12
Connector for
Battery Backup Unit
Non-Buffered 3.3V DIMM Socket
J15 J17
J16
J17
RUBI Slot
Interrupt Steering
J4 Serial EPROM
J5 Serial Port
J6 Write Pending
J7 Bios Enable
J3 J4 J5 J6 J7 J8 J9
J2
J14
PE RC 3/ SC Har d war e In s ta l lati on
J8 User Activity
LED
J9 I2C
Connector
103