Dell Latitude D600 Service Manual page 28

1 back center of the palm
rest
2 touch pad connector
3 system board connector
4 computer base
6. Turn the computer over and remove the nine M2.5 x 8-mm screws.
1 M2.5 x 8-mm screws (9)
NOTICE: Carefully separate the palm rest from the computer base to avoid damage to the palm rest.
7. Starting at the back center of the palm rest, use your fingers to separate the palm rest from the computer base by lifting the inside of the palm rest
while pushing in on the outside.
Back to Contents Page
3R690