Dell 2355DN Service Manual page 43

■ Description of ENGINE JAM type (Simplex)
Type
Leading edge of media does
Jam 0 not arrive at registration within a
certain time after pick-up(If fails
at a time,it tries pick-up again)
Leading edge of media does not
Jam 1 arrive at Exit Sensor within a
certain time after registration
Trailing edge of media does not
Jam 2 leave Exit Sensor within a certain
time after touching registration
■ Description of ENGINE JAM type (Duplex)
Type
Trailing edge of media leaves
Duplex
Exit Sensor, and does not arrive
Jam 1
at Duplex Sensor
Leading edge of media does
Duplex not arrive at registration within
Jam 0 a certain time after touching
Duplex Sensor
Service Manual
Alignment and Troubleshooting
Case
1. Pull out cassette
2. Remove jammed paper
1. Open front cover
2. Pull out toner cartridge
3. Remove jammed paper
1. Open rear cover
2. Pull down jam lever on fuser
unit and open fuser cover)
3. Remove jammed paper from
exit
Case
1. Open rear cover
2. Remove jammed paper
OR
1. Pull out duplex unit
2. Remove jammed paper from
duplex unit
1. Open rear cover
2. Remove jammed paper
OR
1. Pull out duplex unit
2. Remove jammed paper from
duplex unit
Jam Removal
Jam Removal
4-3
Jam Layout
Jam Layout