Scopia Elite Mcu - Samsung VC240 Reference Manual

SCOPIA Elite MCU

SCOPIA Elite MCU 5000 Series
Table 1-1
SCOPIA Elite 5100 Series MCU and SCOPIA Elite 5200 Series MCU.
Table 1-1 Ports Supported by SCOPIA Elite MCU 5000 Series
Port Range Protocol
21 FTP (TCP)
22 SSH (TCP)
80 HTTP (TCP)
(configurable)
161 SNMP (UDP)
162 SNMP (UDP)
443 HTTPS (TCP) Secure web interface
1024-1324 H.245 (TCP)
(configure
within this
range)
RADVISION | RADVISION Port Security Reference Guide
lists the ports supported by all the models in the SCOPIA Elite MCU 5000 Series, including
Functionality
Audio stream recording In
MCU
MCU Administrator and
Conference Control
web user interfaces
Configuration and
status
SNMP Trap events
H.245 signaling
Direction Result of Blocking Port
on Firewall
Cannot record audio
streams
In Cannot view logs in real
time (logs are collected
on the compact flash
card)
In Cannot administer MCU Web client
In Cannot configure or
check the status of the
MCU via SNMP
Out Cannot receive Traps
In Cannot administer MCU
Both Cannot connect H.323
calls
Description
FTP Server
SSH Client
Used for software
upgrade
iVIEW Network Manager,
iVIEW Management Suite
or any other SNMP
manager station
iVIEW Network Manager,
iVIEW Management Suite
or any other SNMP
manager station
Any H.323 entity.
The SCOPIA Elite 5100
Series MCU uses 90 ports
for H.245, while the
SCOPIA Elite 5200 Series
MCU uses 180 ports.
To configure, use the
MCU Advanced
Commands section.
Enter the command
h245baseport to set the
lower port value, and
h245portrange to specify
the number of ports
above the base port to be
used.
| 4