A.2 Cfggen Interface Description; A.3 Cfggen Commands - LSI SAS3442X-R User Manual

A.2 CFGGEN Interface Description

A.3 CFGGEN Commands

CFGGEN uses a command line interface. Commands are formatted as
follows:
cfggen <controller #> <command> <parameters>
The program name, controller number, command, and parameters fields
must be separated by the ASCII space character. The parameter format
is command specific, as described in
Commands."
Information is passed between the user environment and CFGGEN via
the command line, the standard output and standard error interfaces, and
the program return value. The user can redirect the output streams. The
return value is generated when the program exits. A value of 0 is
returned if the command is successful. Otherwise, a value of 1 is
returned.
CFGGEN has the following commands:
CREATE
DEFAULTS (called DELETE in the EFI version)
DISPLAY
FORMAT
HOTSPARE
STATUS
SETOFFLINE (DOS, Linux, and WinPE versions only)
SETONLINE (DOS, Linux, and WinPE versions only)
AUTO (EFI version only)
DISABLEIR (EFI version only)
ENABLEIR (EFI version only)
LIST (EFI version only)
CFGGEN Interface Description
Version 1.1 Copyright © 2006, 2007 by LSI Logic Corporation. All rights reserved.
Section A.3, "CFGGEN
A-3