Using The Cfggen Ir Configuration Utility - LSI SAS3442X-R User Manual

Appendix A
Using the CFGGEN IR
Configuration Utility
This Appendix describes how to use the CFGGEN IR Configuration
Utility to create Integrated Mirroring (IM), Integrated Mirroring Enhanced
(IME), and Integrated Striping (IS) volumes on LSI SAS controllers.
CFGGEN is a command line utility that runs in the DOS, Linux, EFI, and
Windows Pre-Installation (WinPE) environments. CFGGEN is a minimally
interactive program that can be executed from a command line prompt
or a shell script.
The Appendix includes these topics:
Section A.1, "Hardware and Software Requirements," page A-2
Section A.2, "CFGGEN Interface Description," page A-3
Section A.3, "CFGGEN Commands," page A-3
Note: CFGGEN is intended for use only in the manufacturing
environment. End users can use the BIOS-based
configuration utility to create IM, IME, and IS volumes. (See
Chapter 3, "Creating IM and IME Volumes"
"Creating Integrated Striping
Integrated RAID for SAS User's Guide
Version 1.1 Copyright © 2006, 2007 by LSI Logic Corporation. All rights reserved.
and Chapter 5,
Volumes.")
A-1