Table of Contents
Advertisement
6.2.2
Revision number
The revision number of an optical disk drive is represented with an alphabetic character and a
single-digit number. The revision number is shown on the revision label attached to the drive. For
example, Figure 6.1 shows the MCE3130SS revision label format.
(1)
Revision number indication
When the drive is shipped, the revision number is indicated by deleting the numbers up to the
corresponding number on the line of alphabetic characters. (Each number is deleted with double
lines =. See Figure 6.2.)
(2)
Changing the revision number on site
When the revision number is changed on site because of parts replacement or modification, the
new revision number is indicated by circling the number on the line of alphabetic characters. (See
Figure 6.2.)
When a revision number is changed after shipment, Fujitsu issues
"Revision Number Change Request/Notice" to indicate the new revision
number. The user must update the revision label as described above
when changing the revision number.
Revision number indicated on shipment
REV.
NO.
A
Revision number changed on site
REV.
NO.
A
6 - 4
Figure 6.1
NOTICE
=
0
=
1
=
2
3
4
5
=
=
=
0
1
2
3
4
5
Figure 6.2
Revision number indication
C156-E142-02EN
Revision label
" Revision A2
6
7
8
9
" Revision A3
6
7
8
9
Revision number
Hide quick links:
Advertisement
Table of Contents
