4.6.3
FORMAT UNIT command
Bit
7
Byte
0
1
Logical Unit Number
2
3-4
5-11
The FORMAT UNIT command formats media physically on the basis of the specified parameter
values.
When the FmtData bit is 1, the FORMAT UNIT parameter list must be transferred. When the
FMtDAta bit is 1, the Defect List Format must be specified. Defect List Format can be 7 only.
When the FmtData bit is 0, the ODD does not transfer the FORMAT UNIT parameter list and
formats media using the internal default values instead.
The CmpList bit must be 0. If it is 1, the command responds with Check Condition.
The interleaving is set to the internal default value even if a value is specified.
Bit
7
Byte
0-3
0-7
Bit
7
Byte
0
1
Reserved
2-3
Table 4.40 FORMAT UNIT command
6
5
4
Operation Code (04h)
FmtData
Reserved
Interleave
Reserved
Table 4.41 FORMAT UNIT parameter list
6
5
4
Defect List Header
Format Descriptor
Table 4.42 Defect list header
6
5
4
Reserved
DCRT
Defect List Length
C156-E142-02EN
3
2
CmpList
Defect List Format
3
2
3
2
Reserved
IMMED
1
0
1
0
1
0
Reserved
4 - 39