Show Mac Address-Table - D-Link DGS-6600-48TS Manual

DGS-6604 m

show mac address-table

show mac address-table [dynamic | static] [address MAC-ADDR | interface [INTERFACE-ID [ ,
| - ] | vlan VLAN-ID]
Syntax Description
dynamic
static
address MAC-ADDR
interface
INTERFACE-ID
vlan VLAN-ID
Default
Command Mode
Usage Guideline
Examples
Switch# show mac address-table address 00:02:4B:28:C4:82
Vlan Mac Address
---- ----------------- ------- -------------------------
1 00-02-4b-28-c4-82 Static
Total Entries: 1
CLI Reference Guide
Use the show mac address-table command to display: a specific MAC address,
static entries, dynamic entries or the MAC address table of static and dynamic
entries for a specific physical interface, port-channel or VLAN.
(Optional) Displays dynamic MAC address table entries only.
(Optional) Displays static MAC address table entries only.
Specifies the 48-bit MAC address; the valid format is XX:XX:XX:XX:XX:XX
Display information for a specific interface. Valid interfaces include physical ports
and port-channels.
(Optional) Specifies the VLAN ID; valid values are from 1 to 4094.
None
User EXEC or any configuration mode
None
This is an example of output from the show mac address-table address
command:
Type Ports
CPU
show mac address-table
730