Customising The System; Changing The Factory Settings - Pioneer AVIC-505 Owner's Manual

Changing the Factory Settings

Access the factory settings from the "SETTINGS" menu. Display the settings menu by
choosing "SETTINGS" in either the Destination menu or the Guidance menu. To illustrate the
process of changing settings, an example is given here in which "MAP ORIENTATION" is
changed from "HEADING UP" (the factory setting) to "NORTH UP". This refers to the
orientation of the map; "HEADING UP" causes the map to rotate on the display such that your
driving direction is always toward the top of the display, whereas "NORTH UP" puts north
permanently at the top of your display.
• If you set "MAP ORIENTATION" to "HEADING UP" in the Settings menu, your current location
is displayed slightly lower than the centre of the screen. On the other hand, if "MAP
ORIENTATION" is set to "NORTH UP", your location is displayed at the centre of the display.
CAUTION
• For safety reasons, this function is not available while your vehicle is in motion.
Before changing the factory settings, pull over when it is safe to do so and apply
the handbrake.