Allowing Mock Locations; Usb Debugging; Desktop Backup Password - Samsung SGH-T999N User Manual

• Show CPU usage: Screen highlights the current CPU usage.
• GPU rendering profile: Allows you to set the adb shell to
measure rendering.
• Enable traces: Enables/disables on-screen tracing based on
an available parameter.
• Do not keep activities: Destroys every activity as soon as the
application is closed.
• Limit background processes: Sets the number of processes
that can run in the background.
• Show all ANRs: Displays a prompt when applications running
in the background are not responding.

USB Debugging

When enabled, allows debugging when the device is
attached to a PC by a USB cable.
1. From the main Settings page, tap Developer options.
2. Verify the Developer options are active.
3. Tap USB debugging to enable or disable the setting.
When enabled, a check mark appears in the check box.

Allowing Mock Locations

Note: This feature is used for development purposes only.
If you are a developer who is testing a GPS applications using
this device, you can tell the device that the phone is at
different GPS locations. In other words, the phone is allowed
to "mock" the coordinates.
1. From the main Settings page, tap Developer options.
2. Verify the Developer options are active.
3. Tap Allow mock locations to enable or disable the
setting. When enabled, a check mark appears in the
check box.

Desktop Backup Password

Protect the desktop with a backup password ID.
1. From the main Settings page, tap Developer options
2. Verify the Developer options are active.
3. Tap Desktop backup password.
4. In the Settings screen, enter the current full backup
password, the new password for full backups, then
enter the new password again.
Changing Your Settings 307