Entering The Service Tag In The Bios - Dell Alienware M14x Service Manual

14. Replace the memory module(s) (see
15. Follow the instructions from
16. Follow the instructions from
17. Replace the Mini-Card(s) (see
18. Replace the battery pack (see
19. Replace the base cover (see
20. Replace any cards or blank that you removed from the 9-in-1 Media Card reader.
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
21. Turn on the computer.
NOTE: After you have replaced the system board, enter the computer Service Tag into the BIOS of the replacement system board.
22. Enter the service tag (see Entering the Service Tag in the
Entering the Service Tag in the BIOS
1. Ensure that the AC adapter is plugged in and that the main battery is installed properly.
2. Turn on the computer.
3. Press <F2> during POST to enter the system setup program.
4. Navigate to the security tab and enter the service tag in the Set Service Tag field.
Back to Contents Page
Replacing the Memory Module(s)).
step 5 to step 7 in Replacing the Hard
step 7 to step 9 in Replacing the Optical
Replacing the Mini-Card(s)).
Replacing the Battery Pack).
Replacing the Base Cover).
BIOS).
Drive.
Drive.