Usage Data; Firmware - Marantz SR6008 Owner's Manual
Av surround receiver
Hide thumbs
Also See for SR6008:
- Manual del usuario (247 pages) ,
- Getting started manual (10 pages) ,
- Antes de empezar (10 pages)
Table of Contents
Advertisement
Contents
Usage Data
To help us improve our products and customer service, Marantz collects
anonymous information about how you use your AV receiver (such as
frequently used input sources and sound modes and speaker settings).
Marantz will never provide any information we collect to third parties.
Yes : Provide Marantz with information about how you use this unit via
the network.
No : Do not provide Marantz with information about how you use this unit
via the network.
Front panel
Display
Connections
Playback
Rear panel
Settings
Firmware
Set whether or not to check for firmware update, update the firmware,
and display update and upgrade notifications.
2 Update
Update the firmware of the receiver.
Check for Update : Check for firmware updates. You can also check
approximately how long it will take to complete
an update.
Update Start : Execute the update process. When the update starts,
the menu screen is shut down. During the update, the
progress is shown on the display.
%
• If updating fails, the set automatically retries, but if updating is still not
possible, one of the messages shown below is displayed. If the display reads
as shown below, check the settings and network environment, then update
again.
Display
Updating fail
Updating failed.
Login failed
Failure to log into server.
Server is busy
Server is busy. Wait a while then try again.
Connection fail
Failure in connecting to server.
Download fail
Downloading of the firmware has failed.
188
Remote
Tips
Appendix
Description
Index
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the SR6008 and is the answer not in the manual?
Questions and answers
If i choose to reset to original factory settings, where in the manual does it display how to set up the amp with components such as tv and dvd and speakers etc.
To set up the Marantz SR6008 amplifier with a TV, DVD player, and speakers after resetting to factory settings, follow these steps:
1. Power Connection: Plug the receiver into a power outlet using the supplied power cable (CA 120V, 60Hz).
2. Speaker Connection: Connect speakers to the proper speaker terminals, ensuring they match the impedance requirements (6–8Ω).
3. TV Connection: Use an HDMI cable to connect the HDMI OUT port on the receiver to the HDMI IN port on the TV.
4. DVD Player Connection: Connect the DVD player to the receiver using an HDMI cable (preferred) or analog/audio cables.
5. Initial Setup:
- Turn on the receiver.
- Follow the on-screen setup assistant displayed on the TV.
- Use the remote control to navigate and configure audio and video settings.
6. Language Selection: Choose the preferred language when prompted.
7. Audio/Video Configuration:
- Follow the on-screen instructions to configure the speaker setup.
- Assign input sources for devices like the DVD player.
8. Save Settings and Test: After completing the setup, test audio and video output by playing content from the DVD player.
This ensures proper configuration for optimal performance.
This answer is automatically generated