Maintenance --Disk [--Make_Standby [Slot Num]] [--Type <Internal | External-<Num> | Service Tag Clear_Foreign]; Maintenance Commands - Dell PowerVault Storage Area Network Reference Manual

Result
Shutting down interface bond0
[ OK ]
Shutting down loopback interface:
Bringing up loopback interface:
Bringing up interface bond0:
Determining IP information for bond0... done. [
Network settings configured successfully.
result: 0
maintenance --disk [--make_standby [slot num]] [--type <internal | external-<num> |
service tag>] --clear_foreign]
Description
Creates a standby disk for a DR Series system.
Syntax
The --make_standby [slot num] command option changes the state of a physical disk (making disk 3 in this example the
standby). The slot number (0-11) that is defined in the command identifies the physical disk to set as the hot-swap spare.
maintenance --disk --make_standby 3
The --type <internal | external-<num> | service tag>] command option manages the standby disk type (by specifying it as
internal or external, and if external which enclosure number, or by its service tag).
maintenance --disk --type external-1
The --clear_foreign command changes the state of a physical disk. Use this command when inserting a disk from
another appliance, or the disk had been used in a different RAID configuration. After installing, you must enter the
following command at the system prompt:
maintenance --disk --clear_foreign
NOTE: The output of the DR Series system CLI system --show --hardware command lists the current states of the
system disks. One possible state is
addition, an alert is generated if the DR Series system detects that any of the disks were in a foreign state.
maintenance --help
Description
Displays the list of maintenance-related options that can be used as a reference when using the DR Series system CLI.
Syntax
maintenance --help
Result
Usage:
maintenance --filesystem [--scan_status]
[--scan_report [verbose]]
[--repair_status [verbose]]
[--repair_history [verbose]]
[--scan_restart [verify_data]]
[--repair_now]
[--reclaim_space]
[--stop_reclaim_space]
:
foreign , which indicates that the --clear_foreign command needs to be run. In
OK ]
[ OK ]
[ OK ]
97