NOTE: The recommended process for adding an expansion shelf enclosure involves the following tasks:
•
Use the system --license [--validate] [--add] command to validate and install the license for the expansion
shelf enclosure.
•
Power off (if needed) the Dell MD1200 storage array, physically connect the expansion shelf enclosure to
the base DR Series system, and power on the expansion shelf enclosure.
•
Use the system --add_storage --enclosure command (for specific information, see
enclosure <service
system --setname --name <node_name>
Description
Sets the hostname for a DR Series system.
Syntax
system --setname --name acme-60
Result
Successfully updated hostname.
Restarting syslog service ... done.
system --setcompression [--fast] [--best]
Description
Sets the compression type to use on the data stored by a DR Series system (the DR Series system CLI command option
--fast is the default setting).
NOTE: There are two options you can select: --fast, which uses the fastest compression algorithm, and --best,
which compresses the data to get the greatest possible space savings. The following example shows the default
option in use. For more information, see the
Syntax
system --setcompression --fast
Result
Successfully updated compression level.
system --setdate [--date <date>] [--timezone <Region/Zone>]
Description
Sets the date and time zone on a DR Series system.
NOTE: To set a date (month/day/hour/minute) for the DR Series system, enter values using the following format
where the specifying of a four-digit year [[CC]YY] and seconds [.ss] are optional: MMDDhhmm [[CC]YY][.ss]].
For example, September 29, 2011 13:20:00 can be entered in any of the following ways:
•
0929132012 and 092913202012: where 0929 represents September 29, 1320 represents 13:20 in a 24-hour time
format, and 12 and 2012 both represent 2012.
•
0929132012.00 and 092913202021.00: where 0929 represents September 29, 1320 represents 13:20 in a 24-hour
time format, 12 and 2012 both represent 2012, and .00 represents 13:20:00.
tag>).
Dell DR Series System Administrator Guide .
system --add_storage --
73