Ap-175 Series - Dell PowerConnect W-Series FIPS Manual

ENET Ethernet
Status / Activity
11b/g/n 2.4GHz Radio Status
11a/n 5GHz Radio Status

2.4 AP-175 Series

This section introduces the Aruba AP-175 series Wireless Access Points (APs) with FIPS 140-2 Level 2
validation. It describes the purpose of the AP, its physical attributes, and its interfaces.
The Aruba AP-175 is high-performance 802.11n (2x2:2) MIMO, dual-radio (concurrent 802.11a/n + b/g/n)
indoor wireless access points capable of delivering combined wireless data rates of up to 600Mbps. This
multi-function access point provides wireless LAN access, air monitoring, and wireless intrusion detection
and prevention over the 2.4GHz and 5GHz RF spectrum. The multifunction AP-175 is an affordable, fully
hardened outdoor 802.11n access point (AP) that provides maximum deployment flexibility in high-density
campuses, storage yards, warehouses, container/transportation facilities, extreme industrial production
areas and other harsh environments.
Network Link Off
On – Amber
On – Green
Flashing
Off
On – Amber
On – Green
Flashing - Green
Off
On - Amber
On – Green
Flashing - Green
Figure 4 - AP-175 Wireless Access Point
13
Ethernet link unavailable
10/100Mbs Ethernet link negotiated
1000Mbs Ethernet link negotiated
Ethernet link activity
2.4GHz radio disabled
2.4GHz radio enabled in WLAN mode
2.4GHz radio enabled in 802.11n mode
2.4GHz Air monitor or RFprotect sensor
5GHz radio disabled
5GHz radio enabled in WLAN mode
5GHz radio enabled in 802.11n mode
5GHz Air monitor or RFprotect sensor