Download Print this page
Dell PowerConnect W-AP104 Specifications

Dell PowerConnect W-AP104 Specifications

Powerconnect w-ap104 and w-ap105 access points

Advertisement

Quick Links

Dell PowerConnect W-AP104 and
W-AP105 Access Points
The multifunction Dell PowerConnect W-AP104 and W-AP105 are
indoor, dual-radio 802.11n access points (AP) designed for high-
density deployments in offices, hospitals, schools and retail stores.
These compact, high speed APs delivers wire-like performance at
data rates up to 300 Mbps per radio.
The W-AP104 features two 2x2 MIMO dual-band 2.4-GHz/5-GHz
radios with the interface to connect external antennas while the
W-AP105 features the same configuration with integrated internal
antennas. Both are built to provide years of trouble-free operation
and are backed by an Extended Lifetime Warranty.
Working with Dell's line of centralized PowerConnect W Series
Controllers, the W-AP104 and W-AP105 deliver secure, high-speed
wireless network services for user mobility that works seamlessly
within enterprise, branch and campus network deployments.
802.11n provides speed and reliability similar to a wired LAN. It also
increases performance by utilizing techniques such as channel
bonding, block acknowledgement and MIMO radios. Advanced
antenna technology also increases range and reliability.
Key to ensuring wire-like performance and reliability is Adaptive
Radio Management (ARM) capability, which manages the 2.4-GHz
and 5-GHz radio bands to deliver maximum client performance.
Adaptive Radio Management enables different 802.11 a, b,g
and n wireless clients to operate on the same network at
maximum possible performance through the use of band steering,
airtime fairness policies between clients, and by managing channel
interference that may occur between access points.
The multifunction W-AP104 and W-AP105 can be configured through
the controller to provide wireless LAN (WLAN) access with part-
time air monitoring, dedicated air monitoring for wireless intrusion
protection, Remote AP (RAP) functionality or secure enterprise mesh.
The W-AP104 and W-AP105 feature dual 100/1000 BASE-T Ethernet
interfaces and operate from standard Power-over-Ethernet (PoE)
sources or a 12-volt DC power supply.
Mainstream
600 Mbps 802.11n
access point for
secure dual-band
wireless mobility.
Dell_PowerConnect_WAP104_AP105 page 1

Advertisement

loading

Summary of Contents for Dell PowerConnect W-AP104

  • Page 1 The multifunction W-AP104 and W-AP105 can be configured through the controller to provide wireless LAN (WLAN) access with part- time air monitoring, dedicated air monitoring for wireless intrusion protection, Remote AP (RAP) functionality or secure enterprise mesh.
  • Page 2: Specifications

    - 4 x RP-SMA antenna interface connectors for external - 802.11a/b/g/n access point antenna support. External Antenna selection guide is - Air monitor, spectrum monitor available from Dell representative or downloadable from - Remote AP Dell.com/wireless - Secure enterprise mesh • W-AP105:...
  • Page 3 W-AP104 and W-AP105 RF Performance Table Max TX power per active Max TX power per active RX Sensitivity (dBm) RX Sensitivity (dBm) TX chain (dBm) TX chain (dBm) 2.4 GHz 5 GHz 802.11b 1Mbps 2Mbps 5.5Mbps 11Mbps 802.11a/g 6Mbps 9Mbps...
  • Page 4 *Select PowerConnect products carry an Extended Life Warranty with Basic Hardware Service. Warranty covers repair or replacement of the product for as long as it remains in use by the customer. In the event of discontinuance of product manufacture, Dell Extended Life Warranty extends until five (5) years after end of product model sales.

This manual is also suitable for:

Powerconnect w-ap105