Table of Contents
Advertisement
VCR OPERATION
Hi-Fi Stereo Sound System
This VCR/DVD will record and playback Hi-Fi stereo sound. In
addition it has a NICAM stereo sound decoder.
This equipment will receive stereo and bilingual broadcasts
and there are several ways of recording and playing back the
sound.
Selecting the Sound Mode
You can select each mode by pressing AUDIO SELECT. Each
mode is indicated on the TV screen as following.
• During playback of the recorded tape in
Hi-Fi mode:
Mode
AUDIO OUTPUT
L
Hi Fi L Audio
Stereo
R
Hi Fi R Audio
L
Hi Fi L Audio
L
R
Hi Fi L Audio
L
Hi Fi R Audio
R
R
Hi Fi R Audio
L
Normal Audio
Normal
R
Normal Audio
• Reception of stereo broadcasts:
Mode
AUDIO OUTPUT
L
L Audio
Stereo
R
R Audio
L
L Audio
L
R
L Audio
L
R Audio
R
R
R Audio
L
L+R Audio
Monaural
R
L+R Audio
• During reception of bilingual broadcasts:
Mode
AUDIO OUTPUT
L
Main Audio
MAIN
R
Main Audio
L
Sub Audio
SUB
R
Sub Audio
L
Main Audio
MAIN
SUB
R
Sub Audio
NOTES:
• If you play non-Hi-Fi tapes, the VCR/DVD will play auto-
matically in monaural even if you select any mode.
• If the stereo signal becomes weak, the broadcast is
automatically recorded in monaural.
OTR (One Touch Recording)
This function enables you to set the duration of a recording
simply by pressing REC/OTR.
1
1
3
Follow steps
to
same Programme".
2
Press REC/OTR repeatedly until the desired recording
length appears in the upper left corner of the TV screen.
Display on
the TV screen
STEREO
LEFT
RIGHT
- None -
Display on
the TV screen
STEREO
LEFT
RIGHT
- None -
Display on
the TV screen
MAIN
SUB
MAIN
SUB
in "Viewing and Recording the
Recording stops when 0:00 is reached.
• To check remaining time during an OTR, press DIS-
PLAY.
• To change the recording length during an OTR, press
REC/OTR until the desired length appears.
• To stop an OTR before recording is finished, press
STOP.
• To cancel the OTR but continue recording, press
REC/OTR repeatedly until "I" appears without the
recording length.
NOTE:
• If there is no timer recording set after an OTR, the
VCR/DVD switches to DVD mode and TIMER indicator
flashes because the VCR is still on standby for timer
recordings. Press TIMER ON/OFF on the remote con-
trol or STOP/EJECT on the VCR/DVD to cancel timer
standby, then press VCR button to use the VCR again.
If there is a timer recording set after an OTR, the
VCR/DVD switches to the DVD mode and TIMER indi-
cator lights up, indicating that the VCR/DVD is on timer
standby. Press TIMER ON/OFF on the remote control
or STOP/EJECT on the VCR/DVD to cancel timer
standby, then press VCR button to use the VCR again.
Auto Repeat Playback
The VCR/DVD has an auto repeat function that allows you to
repeat a tape indefinitely without touching PLAY.
1
Insert a pre-recorded tape and press VCR, then MENU.
2
Press K or L to select SET UP, then press B.
3
Press K or L to select AUTO REPEAT.
4
Press B so that ON appears next to AUTO REPEAT on
the TV screen.
When in Stop mode, Auto Repeat mode will start automatical-
ly. If the on-screen menu still remains, press MENU to
exit, then press PLAY.
NOTE:
• Once you select the Auto Repeat mode, it stays in effect
even after you turn off the VCR/DVD.
To stop playback
Press STOP.
To exit the Auto Repeat mode
Repeat steps
1
to
OFF will appear next to AUTO REPEAT on the TV screen.
Press MENU to exit.
Picture Select
This function enables you to select the picture quality of a
tape.
1
Press VCR, then MENU.
2
Press K or L to select SET UP, then press B.
3
Press K or L to select PICTURE.
4
Press B until the desired mode (NORMAL, SOFT, or
SHARP) is indicated on the TV screen.
5
Press MENU to exit.
NOTE:
• Once you select the Picture Select mode, it stays in
effect even after you turn off the VCR/DVD.
– 15 –
3
.Then, press B.
EN
Advertisement
Table of Contents
