Table of Contents
Advertisement
VCR OPERATION
Recording one Programme while viewing another
You can record one programme while viewing another. To
start recording, follow steps
Recording the same Programme". Then, set the TV to the
channel you want to watch.
To monitor the progress of your recording
Select the video channel on the TV.
Assemble Function
You can record in continuation from previous programme on
a pre-recorded tape.
1
Insert a pre-recorded tape. Press PLAY to start playback.
2
Press STILL/PAUSE at the desired point on the tape.
3
Press REC/OTR. The VCR/DVD will be the Recording
Pause mode.
4
Press CH (o o /p p ) to select the channel to be recorded .
5
Press REC/OTR or STILL/PAUSE. The recording will
begin.
6
Press STOP when recording is completed.
Hi-Fi Stereo Sound System
This VCR/DVD will record and playback Hi-Fi stereo sound. In
addition it has an A2 and NICAM stereo sound decoder.
This equipment will receive stereo and bilingual broadcasts
and there are several ways of recording and playing back the
sound.
Selecting the Sound Mode
You can select each mode by pressing AUDIO. Each mode is
indicated on the TV screen as following.
• During playback of the recorded tape in
Hi-Fi mode:
Mode
AUDIO OUTPUT
L
Hi Fi L Audio
Stereo
R
Hi Fi R Audio
L
Hi Fi L Audio
L
R
Hi Fi L Audio
L
Hi Fi R Audio
R
R
Hi Fi R Audio
L
Normal Audio
Normal
R
Normal Audio
• Reception of stereo broadcasts:
Mode
AUDIO OUTPUT
L
L Audio
Stereo
R
R Audio
L
L Audio
L
R
L Audio
L
R Audio
R
R
R Audio
L
L+R Audio
Monaural
R
L+R Audio
1
4
to
under "Viewing and
Display on
the TV screen
STEREO
LEFT
RIGHT
- None -
Display on
the TV screen
STEREO
LEFT
RIGHT
- None -
• During reception of bilingual broadcasts:
Mode
MAIN
SUB
MAIN
SUB
NOTES:
• If you play non-Hi-Fi tapes, the VCR/DVD will play auto-
matically in monaural even if you select any mode.
• If the stereo signal becomes weak, the broadcast is
automatically recorded in monaural.
OTR (One Touch Recording)
This function enables you to set the duration of a recording
simply by pressing REC/OTR.
1
1
Follow steps
same Programme".
2
Press REC/OTR repeatedly until the desired recording
length appears in the upper left corner of the TV screen.
Recording stops when 0:00 is reached.
• To check remaining time during an OTR, press DIS-
PLAY.
• To change the recording length during an OTR, press
REC/OTR repeatedly until the desired length appears.
• To stop an OTR before recording is finished, press
STOP.
• To cancel the OTR but continue recording, press
REC/OTR repeatedly until I appears without the
recording length.
NOTE:
• If there is no timer recording set after an OTR, the
VCR/DVD switches to DVD mode and TIMER indicator
flashes because the VCR is still on standby for timer
recordings. Press TIMER ON/OFF on the remote con-
trol or STOP/EJECT on the VCR/DVD to cancel timer
standby, then press VCR button to use the VCR again.
If there is a timer recording set after an OTR, the
VCR/DVD switches to the DVD mode and TIMER indi-
cator lights up, indicating that the VCR/DVD is on timer
standby. Press TIMER ON/OFF on the remote control
or STOP/EJECT on the VCR/DVD to cancel timer
standby, then press VCR button to use the VCR again.
– 15 –
Display on
AUDIO OUTPUT
the TV screen
L
Main Audio
R
Main Audio
L
Sub Audio
R
Sub Audio
L
Main Audio
R
Sub Audio
3
to
in "Viewing and Recording the
MAIN
SUB
MAIN
SUB
EN
Advertisement
Table of Contents
