Installing The Printer Driver - Sharp AJ-2105 Operation Manual

INSTALLING THE PRINTER DRIVER

Installing onto Windows Me (USB interface)
Make sure that the printer is connected to your computer by
1
USB cable.
Turn on the printer, and then turn on your computer.
2
"Add New Hardware Wizard" window will appear.
If this window does not appear, refer to "Failed to Install the Printer Driver (USB
Interface)" in "Troubleshooting" of the online manual.
Insert the supplied CD-ROM into your CD-ROM drive.
3
Check the radio button for "Automatic search for a better driver
4
(recommended)", and then click the "Next" button.
Click the "Finish" button.
5
"Add New Hardware Wizard" window will close.
Double-click "My Computer" (
6
ROM ( ) icon.
Double-click the "Setup" (
7
Check if the appropriate language has been selected, and then
8
click the "OK" button.
Normally, the correct language is selected automatically.
After confirming the message in the "Welcome" window, click
9
the "Next" button.
Be sure to read the descriptions in the "ReadMe" window, and
10
then click the "Next" button.
), and then double-click the CD-
) icon.
21