Table of Contents
Advertisement
Printer Inoperative
If the power lamp of the printer does not light up after being turned on, or all of the lamps keep blinking for a long
time, refer to the steps below.
CHECK1
Is the power cord connected?
Securely plug the power cord into the power connector
of the printer and the electrical outlet. The power cord
might not be inserted correctly. After firmly plugging
in the printer, verify whether or not the power lamp has
come on.
For details on connecting the printer to an
Reference:
electrical outlet, see "CONNECTING THE
POWER CORD" in the Setup Guide and
Operation Manual.
CHECK2
Is the printer plugged into a working
electrical outlet?
Connect some other appliance to the electrical outlet to
verify whether the power source is supplying power.
How to Use the
Online Manual
Printer Properties
If all the lamps keep blinking
If all the lamps including the power lamp, the ink lamp, and the
paper lamp are blinking, make sure no paper has been
jammed and then press the paper button.
If any paper has been jammed, remove the jammed paper, and
then press the paper button.
If all the lamps are still blinking after pressing the paper button,
unplug the power cord from the printer, and then plug it in
again. If your printer still does not work, please contact your
authorised SHARP service centre.
Print
Maintenance
Troubleshooting
47
Troubleshooting
Advertisement
Table of Contents
