Sharp AJ-2100 Operation Manual page 35

2) Select a pattern sample for "Pattern B".
Look at the chart B on your test chart. Select the number under the pattern
sample, in which
Example:
3) Select pattern samples for "Pattern C" and "Pattern D" respectively.
Look at the chart C and D on your test chart. Select the numbers under the pattern
samples, which have the straightest lines.
Example:
cracked line
Click the "OK" button in the "Align print head" dialog box.
8
The print head will align itself.
If you cannot find any satisfactory pattern sample for each of "Pattern A" to
"Pattern D" settings, select the best ones among the printed pattern samples,
and then go back to step 5. (For Macintosh, go back to step 3 on page 38.)
The printer cannot perform other operations while aligning the print head.
is located the closest to the centre of the two horizontal lines.
-6
B
-8 -7 -6 -5 -4 -3 -2 -1
-6
C or D
-6 -5 -4 -3 -2 -1
ALIGNING THE PRINT HEAD
+8
0 +1 +2 +3 +4 +5 +6 +7 +8
+1
straight line
0 +1 +2 +3 +4 +5 +6
33