Sharp AJ-2100 Operation Manual page 30

INSTALLING THE PRINTER DRIVER BY "ADD PRINTER"
Select the port to be used, and click the "Next" button.
11
If you are using Windows 95 / 98, and your printer is connected by parallel interface
cable, select LPT port (typically "LPT1"). On the other hand, if your operating
system is Windows 98, and your printer is connected by USB cable, select "USB
port" (typically "USB-PRN0").
With a Windows98 preinstalled computer connected to this printer by USB cable
If the "USB port" does not appear on the screen, install the USB driver onto
your computer, following the steps shown in "Installing the USB driver
(Windows 98)" (page 21).
If you reinstalled the USB driver and printer driver after having uninstalled the
printer driver, more than two USB ports, for example, USB-PRN0, USB-PRN1, and
USB-PRN2, may be displayed on the screen as your options. In this case, select
the newest port, which has the largest port number. If there are any port numbers
which are not in use, the printer will work properly.
Click the "Finish" button.
12
If the program displays "Do you want your Windows-based programs to use this
printer as the default printer?", check "Yes".
You have completed the installation of the printer driver.
Before attempting to print a test page, align the print head by the procedure on
page 32.
28