Step 4B: Manual Setup; Preparing To Install - NEC Express5800/320Fd-LR User Manual

Step 4B: Manual Setup

Follow the procedures below to create "OEM-Disk" before starting the OS install.

Preparing to Install

Windows Server 2003 x64 Editions
You can create a Windows Server2003 x64 Edition OEM-Disk for EXPRESSBUILDER by
following two procedures.
Create from EXPRESSBUILDER
Select this procedure when the NEC Express5800 series is the only computer for creating Windows
Server2003 x64 Edition OEM-Disk for EXPRESSBUILDER. If Windows Server 2003 x64 Editions
operates on the NEC Express5800, you can also select [Create from the menu start by auto-run]
described later.
The procedure is as follows:
Prepare one 3.5-inch floppy disk.
1.
Insert the "NEC EXPRESSBUILDER"DVD into the optical disc drive.
2.
Reset (Press <Ctrl> + <Alt> +<Del>) or power off to reboot the Express5800 series.
3.
System launches from the DVD-ROM, and NEC EXPRESSBUILDER starts.
Select [Create the OEM-Disk for Windows] from the [Step 1, Top menu], then click [Next].
4.
5. Select [Create Windows Server 2003 x64 Edition OEM-Disk for EXPRESSBUILDER] from
the [Create Windows OEM-Disk], then click [Perform].
6. Follow the instruction on the screen and set the floppy disk into the floppy disk drive.
[Windows Server 2003 x64 Editions OEM-Disk for EXPRESSBUILDER] is created.
Protect the disk from overwrite and label as [Windows Server 2003 x64 Edition OEM-Disk
for EXPRESSBUILDER]. Store this OEM disk in a safe place.
Create from the menu start by auto run
Menu starts automatically by the auto run function when you load the DVD into an optical disc
drive that is mounted on a computer running an operating system Windows 2000 + Internet Explorer
6.0, Windows XP, Windows Vista or Windows Server 2003. From this menu, you can create
[Windows Server2003 x64 Edition OEM-Disk for EXPRESSBUILDER]. (Including Express the
NEC 5800 series)
Windows Setup 4-25