NEC Express5800/320Fd-LR User Manual page 149

(b) Set the OS-specific "OEM-DISK" and press Enter.
(c) Select [Stratus Virtual Disk Driver] and then press Enter.
The screen of (a) is displayed again.
(d) Select [Stratus Embedded SAS Adapter] and then press Enter.
Go back to the screen of the procedure (a), press S key and proceed to the procedure
(d).
(e) When the following screen appears, remove the floppy disk from the floppy disk drive
and press Enter.
Setup will load support for the following mass storage device(s):
Stratus Virtual Disk Driver
Stratus Embedded SAS Adapter
Continue the operations by following the messages.
4.
When you start up Recovery Console from Windows Server 2003 CD-ROM, the following
message appears. Press the R key to boot Recovery Console.
Welcome to Setup.
This portion of the Setup program prepares Microsoft(R)
Windows(R) to run on your computer.
- To set up Windows now, press ENTER.
- To repair a Windows installation using
- Recovery Console, press R.
- To quit Setup without installing Windows, press F3.
Troubleshooting 6-7